Our in house developed and produced G.P. Switch is finally ready. We have been working on it for an extended period of time and put it through rigorous tests on the track. The G.P. Switch senses pressure on the gear shift pedal. With a G.P. Switch you don't have to worry about a pullswitch coming out off adjustment, or even installing a pullswitch since the G.P. Switch is replacing the pullswitch altogether. The G.P.Switch is easy to install since no fabrication of a bracket is necessary. The G.P. Switch can be removed from the bike and reinstalled without any adjustment changes, adjust it once, and that's it. One cable to gnd and the other to the Killbox.

The G.P. Switch is ultra hightech with 13 parts. It has a totally submersible internal microswitch for flawless operation under race conditions. It has dual turn dial adjustable tension to fit any linkage on the market. It senses both push and pull type linkages. We chose to use an internal switch instead of waterproofing the whole switch housing and ground wires inside the switch like x-brand shifter sensors. With the internal switch we get IP 67 certified waterproof performance. We also decided to make our switch operate with both push and pull type linkages, other brands are selling single use sensors only.

The G.P. Switch comes with a 250mm aluminum rod. The rod is machined to female m6 on one end to fit the G.P. Switch. The other end is left unmachined since there are soo many variables with each bike on the market, length and threads, left or right hand threads.

Universal shift rod

Cordona G.P. Switch - $179

This shifter is fairly simple to install using the provided directions. However, if you are unfamiliar with this type of installation or have never installed electronic performance upgrades to your motorcycle, Rebellion Motorsports would recommend professional installation and set up.

You must include bike year, make and model in order notes.